Tunable Core-Shell Nanowire Active Material for High Capacity Li-Ion Battery Anodes Comprised of PECVD Deposited aSi on Directly Grown Ge Nanowires

ACS Appl Mater Interfaces. 2019 May 29;11(21):19372-19380. doi: 10.1021/acsami.9b03931. Epub 2019 May 14.

Abstract

Herein, we report the formation of core@shell nanowires (NWs) comprised of crystalline germanium NW cores with amorphous silicon shells (Ge@aSi) and their performance as a high capacity Li-ion battery anode material. The Ge NWs were synthesized directly from the current collector in a solvent vapor growth (SVG) system and used as hosts for the deposition of the Si shells via a plasma-enhanced chemical vapor deposition (PECVD) process utilizing an expanding thermal plasma (ETP) source. The secondary deposition allows for the preparation of Ge@aSi core@shell structures with tunable Ge/Si ratios (2:1 and 1:1) and superior gravimetric and areal capacities, relative to pure Ge. The binder-free anodes exhibited discharge capacities of up to 2066 mAh/g and retained capacities of 1455 mAh/g after 150 cycles (for the 1:1 ratio). The 2:1 ratio showed a minimal ∼5% fade in capacity between the 20th and 150th cycles. Ex situ microscopy revealed a complete restructuring of the active material to an interconnected Si1- xGe x morphology due to repeated lithiation and delithiation. In full-cell testing, a prelithiation step counteracted first cycle Li consumption and resulted in a 2-fold improvement to the capacity of the prelithiated cell versus the unconditioned full-cells. Remarkable rate capability was also delivered where capacities of 750 mAh/g were observed at a rate of 10 C.

Keywords: coaxial; ex situ; full-cell; half-cell; preconditioning; prelithiation.