Microstructured Porous Pyramid-Based Ultrahigh Sensitive Pressure Sensor Insensitive to Strain and Temperature

ACS Appl Mater Interfaces. 2019 May 29;11(21):19472-19480. doi: 10.1021/acsami.9b03261. Epub 2019 May 14.

Abstract

An ultrahigh sensitive capacitive pressure sensor based on a porous pyramid dielectric layer (PPDL) is reported. Compared to that of the conventional pyramid dielectric layer, the sensitivity was drastically increased to 44.5 kPa-1 in the pressure range <100 Pa, an unprecedented sensitivity for capacitive pressure sensors. The enhanced sensitivity is attributed to a lower compressive modulus and larger change in an effective dielectric constant under pressure. By placing the pressure sensors on islands of hard elastomer embedded in a soft elastomer substrate, the sensors exhibited insensitivity to strain. The pressure sensors were also nonresponsive to temperature. Finally, a contact resistance-based pressure sensor is also demonstrated by chemically grafting PPDL with a conductive polymer, which also showed drastically enhanced sensitivity.

Keywords: e-skin; porous pyramid; pressure sensor; strain insensitive; temperature insensitive.