An integral manufacturing process with hot drawing and cold flow forming was proposed for large-diameter seamless steel gas cylinders. The main purpose of this study was to find out the effects of the manufacturing process on the microstructure and mechanical properties of gas cylinders made of 34CrMo4 steel. Two preformed cylinders were produced by hot drawing. One cylinder was then further manufactured by cold flow forming. The experiments were carried out using three types of material sample, namely, base material (BM), hot drawing cylinder (HD), and cold flow-formed cylinder (CF). Tensile and impact tests were performed to examine the mechanical properties of the cylinders in longitudinal and transverse directions. Microstructure evolution was analyzed by scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) to reveal the relation between the mechanical properties and the microstructure of the material. It is found that the mechanical properties of the 34CrMo4 steel gas cylinders were significantly improved after hot drawing and flow forming plus a designed heat treatment, compared with the base material. The observations of microstructure features such as grain size, subgrain boundaries, and residual strain support the increase in mechanical properties due to the proposed manufacturing process.
Keywords: flow forming; gas cylinder; hot drawing; mechanical properties; microstructure.