To reveal the potential and limits of multi-material three-dimensional (3D) printed parts in droplet-based additive manufacturing, a study combining tensile experiments and 3D imaging technique is proposed. A polymeric composite structure made of acrylonitrile butadiene styrene and thermoplastic polyurethane is manufactured using a two extrusion head printer. The quality of the interface between the two thermoplastics is quantified by adjusting the number of intertwining droplets at the interface. Tensile experiments assisted with digital image correlation are performed with two-interface orientation to discriminate shearing and traction at the interface. The 3D imaging results, which are based on X-ray micro-tomography, show the distinct features of droplet-based additive manufacturing in terms of porosity content and connectivity. Interface properties are found to control, in an incomparable way, the mechanical response. It is found that the interface quality is determinant for enhancing the ultimate performance whereas the interface orientation is found to be the perfect leverage for varying the slope of the linear part.
Keywords: X-ray micro-tomography; droplet-based additive manufacturing; interface properties; multi-material print.