Nowadays, developing new methods for the effective extraction/separation of drugs (present at trace levels) from complicated matrices (as biological fluids) is certainly a great challenge for many operators. In this regard, green-based agarose gel electromembrane extraction (G-EME) was for the first time combined with dispersive liquid-liquid microextraction (DLLME) toward G-EME/DLLME methodology (i.e., tandem extraction approach). Two basic drugs such as trimipramine (TRI) and clomipramine (CLO) extracted from the urine samples, were used as model compounds. Regarding method workflow, analytes were extracted from the 5 mL sample, through a synthesized agarose gel membrane, to the 700 µL aqueous acceptor phase under the optimized conditions (pH of acceptor phase: 2.0; pH of gel membrane: 2.0; pH of donor phase: 4.0, voltage value: 30 V, and extraction time: 25 min). In the next step, acceptor solution was poured to a conic vial and mixed with 100 µL alkaline solution (NaOH, 1 M). Afterwards, DLLME procedure took place again at optimal conditions, i.e., extraction solvent was carbon tetrachloride (10 µL), and dispersive solvent was acetone (100 µL). Ultimately, gas chromatography (GC) was applied for the detection and quantification of drugs. Such G-EME/DLLME configuration has brought two main advantages. Firstly, interferences such as proteins and other large biological molecules were eliminated from biological fluids via G-EME. Further, high enrichment factors (EFs of 260-370 refer to extraction recoveries of 52-74%) were obtained using DLLME with acceptable detection limits (1.0-3.0 ng mL-1). Finally, the suggested approach was successfully utilized to determine drugs at trace levels in urine samples.
Keywords: Basic drugs; Biological fluids; Dispersive liquid–liquid microextraction; Gel electromembrane extraction; Green-based extraction.
Copyright © 2019 Elsevier B.V. All rights reserved.