A metal-catalyst-free method for the direct growth of patterned graphene on an insulating substrate is reported in this paper. Parylene N is used as the carbon source. The surface molecule layer of parylene N is cross-linked by argon plasma bombardment. Under high-temperature annealing, the cross-linking layer of parylene N is graphitized into nanocrystalline graphene, which is a process that transforms organic to inorganic and insulation to conduction, while the parylene N molecules below the cross-linking layer decompose and vaporize at high temperature. Using this technique, the direct growth of a graphene film in a large area and with good uniformity is achieved. The thickness of the graphene is determined by the thickness of the cross-linking layer. Patterned graphene films can be obtained directly by controlling the patterns of the cross-linking region (lithography-free patterning). Graphene-silicon Schottky junction photodetectors are fabricated using the as-grown graphene. The Schottky junction shows good performance. The application of direct-grown graphene in optoelectronics is achieved with a great improvement of the device fabrication efficiency compared with transferred graphene. When illuminated with a 792 nm laser, the responsivity and specific detectivity of the detector measured at room temperature are 275.9 mA/W and 4.93 × 109 cm Hz1/2/W, respectively.
Keywords: Schottky junction; cross-linking; direct growth; graphene; metal-catalyst-free; parylene; photodetector.