Fabrication of microfluidic devices by soft lithography is by far the most popular approach due to simplicity and low cost. In this approach PDMS (polydimethylsiloxane) is cast on a photoresist master to generate replicas that are then sealed against glass slides using oxygen plasma. In this work, we demonstrated fabrication of soft photolithography masters using lamination of ADEX dry film as an alternative to the now classic SU-8 resist masters formed by spin coating. Advantages of using ADEX dry film include the easily-achievable uniform thickness without edge bead; simplicity of the process with significant time savings due to non-sticky nature of the film; and fewer health concerns due to less toxic developing solution and antimony-free composition. As we demonstrate, the process can be performed in a low-cost improvised fabrication room in ambient light, in place of a conventional yellow-light cleanroom environment. We believe this approach holds the promise of delivering state-of-the-art microfluidic techniques to the broad field of biomedical and pharmaceutical research.
Keywords: dry photoresist; microfluidics; soft lithography.