Commonly dose-responses of conventional dosimetric methods are affected by a saturation dose and are known to be limited when the delivered dose is relatively high. In contrast, elastic properties of polymer-gel dosimeter phantoms play major roles in a new dosimetry technique using magnetic resonance elastography (MRE). A single volume of polymer-gel dosimeter solution containing methacrylic and ascorbic acid in gelatin initiated by copper was prepared. The material was subsequently stored in cylindrical containers for future use as a biological tissue-mimicking phantom material. The phantom material was irradiated with gamma rays, where absorbed doses of 10-50 Gy were delivered. To study the dynamic elastic behaviour, periodic mechanical external forces of 100-400 Hz were applied to generate shear waves in the samples. The radiation-induced changes in the shear modulus of the samples were estimated from wave-displacement images and converted to elastograms. The smallest and largest shear modulus values were approximately 2.10 ± 0.64 and 35.26 ± 2.85 kPa, respectively. The dynamic elastic response of the polymer-gel dosimeters showed an increased dependency with frequency. A linear relationship (R2 = 0.996) was observed between the integrated area and the absorbed dose of the samples. The elastograms clearly showed that the largest shear modulus values were in the irradiated region of the polymer-gel dosimeter phantoms. Quantitative values of the shear modulus of polymer-gel dosimeters were estimated using MRE.
Keywords: Dynamic elastic properties; Elastograms; Magnetic resonance elastography; Polymer-gel dosimetry phantoms; Shear modulus.
Copyright © 2019. Published by Elsevier Ltd.