The photocatalytic inactivation of Escherichia coli (E. coli) under light-emitting diode (LED) light irradiation was performed with P/Ag/Ag2O/Ag3PO4/TiO2 photocatalyst to investigate the photocatalytic bactericidal activity. Our work showed that this composite photocatalyst possessed remarkable bacterial disinfection ability and could completely inactivate 108 cfu/mL of E. coli within just 40 min under the optimum catalyst loading of 0.5 g/L. The effects of different environmental factors, including light wavelength, light intensity, temperature, solution pH and inorganic ions, on the inactivation efficiency were evaluated. The results showed that bacteria inactivation by P/Ag/Ag2O/Ag3PO4/TiO2 was more favorable with blue colored LED irradiation, light intensity at 750 W/m2, temperature in the range of 30-37 °C and pH values at natural or slightly alkaline condition. The existence of different inorganic ions under normal environmental level had no significant impact on the bactericidal performance. In addition, during the inactivation process, the morphology changes of E. coli cells were directly observed by scanning electron microscope (SEM) and further proved by the measurement of K+ leakage from the inactivated E. coli. The results demonstrated that the photocatalytic inactivation caused drastic damage on bacterial cells membrane. Furthermore, the mechanisms of photocatalytic bacterial inactivation were also systemically studied and the results confirmed that the excellent disinfection activity of P/Ag/Ag2O/Ag3PO4/TiO2 resulted from the major reactive species: h+ and ·O2- from photocatalytic process instead of the leakage of Ag+ (≤0.085 ± 0.005 mg/L) from photocatalyst. These results indicate that P/Ag/Ag2O/Ag3PO4/TiO2 photocatalyst has promising potential for real water sterilization application.
Keywords: Disinfection mechanism; Environmental factors; Escherichia coli inactivation; LED light irradiation; P/Ag/Ag(2)O/Ag(3)PO(4)/TiO(2) photocatalyst.
Copyright © 2019 Elsevier Ltd. All rights reserved.