Rationale: Issues induced by neutron irradiation makes 40 Ar/39 Ar dating inapplicable in some cases. The first issue is 37 Ar and 39 Ar recoil effects during irradiation that affect fine-grained minerals (<50 μm), such as lunar rocks, glassy groundmass, supergene minerals (e.g., illite, glauconite, Mg-oxide, etc.). The second issue from neutron irradiation is the high radioactivity gain of iron-rich samples such as pyrite, and the third is the production of interference nuclides during irradiation. The inherent drawbacks of conventional K-Ar and current unspiked K-Ar dating make it difficult to assess the reliability of age results.
Methods: A new approach is proposed using well-calibrated 40 Ar/39 Ar standard minerals to directly quantify 40 Ar, 38 Ar and 36 Ar. Fish Canyon sanidine (FCs), B4M muscovite and MMhb-1 hornblende, the widely used international standard minerals, were analyzed as unknowns to test the approach. Argon isotope analyses were carried out on a noble-gas mass spectrometer using laser fusion on microsamples (n × 0.01 to n × 0.2 mg). A new isochron - an "inverse isochron" for K-Ar dating - was designed.
Results: FCs and B4M yielded apparent and inverse isochron ages of 28.1 ± 0.1 and 28.0 ± 0.3 Ma, 18.2 ± 0.1 and 18.2 ± 0.5 Ma, which are consistent with the recommended ages, while the MMhb-1 presented lower apparent and inverse isochron ages (510.8 ± 4.8 and 512.3 ± 17.0 Ma) than the recommended ones. The initial argon compositions for the three standard minerals are 299.2 ± 205.3 (FCs), 294.0 ± 16.4 (B4M) and 290.9 ± 203.1 (MMhb-1), agreeing with that of air.
Conclusions: The proposed approach potentially overcomes the issues of 40 Ar/39 Ar rising from irradiation and the drawbacks of K-Ar. By using laser fusion on multiple microaliquots from a same sample, this approach can produce accurate and precise K-Ar ages and give an inverse isochron. This new approach may provide an alternate dating method of geochronology based on argon isotopes.
© 2019 John Wiley & Sons, Ltd.