The use of Fiber Reinforced Polymer (FRP) composites for strengthening concrete structures has gained a lot of popularity in the past couple of decades. The major issue in the retrofitting of concrete structures with FRP is the accurate evaluation of flexural and shear strains of polymer composites at the bonding interface of epoxy and concrete. To address it, a comprehensive experimental study was planned and carbon fiber reinforced polymer (CFRP) composite was applied on the concrete surface with the help of adhesives. CFRP was used as an external mounted flexural and shear reinforcement to strengthen the beams. Flexural load tests were performed on a group of eight reinforced concrete beams. These beams were strengthened in flexural and shear by different reinforcement ratios of CFRP. The strain gauges were applied on the surface of concrete and CFRP strips to assess the strain of both CFRP and concrete under flexural and shear stresses. The resulting test data is presented in the form of load⁻deformation and strain values. It was found that the values of strains transferred to the FRP through the concrete are highly dependent on the surface tensile properties of concrete and debonding strength of the adhesive. The test results clearly indicated that the strength increment in flexural members is highly dependent on strain values of the CFRP.
Keywords: carbon fiber reinforced polymer composites; concrete interface; debonding; epoxy; shear strain; tensile strain.