A 1.6 μm differential absorption Lidar (DIAL) system for measurement of vertical CO₂ mixing ratio profiles has been developed. A comparison of CO₂ vertical profiles measured by the DIAL system and an aircraft in situ sensor in January 2014 over the National Institute for Environmental Studies (NIES) in Tsukuba, Japan, is presented. The DIAL measurement was obtained at an altitude range of between 1.56 and 3.60 km with a vertical resolution of 236 m (below 3 km) and 590 m (above 3 km) at an average error of 1.93 ppm. An in situ sensor for cavity ring-down spectroscopy of CO₂ was installed in an aircraft. CO₂ mixing ratio measured by DIAL and the aircraft sensor ranged from 398.73 to 401.36 ppm and from 399.08 to 401.83 ppm, respectively, with an average difference of -0.94 ± 1.91 ppm below 3 km and -0.70 ± 1.98 ppm above 3 km between the two measurements.
Keywords: CO2; aircraft; differential absorption Lidar; vertical profile.