Due to their hardness and low tool wear, tungsten carbides are widely used in industrial applications, such as spray nozzles, wire drawing dies and spinning nozzles. However, there is no conventional machining process that is capable of fabricating micro-holes, slots and complicated shapes in tungsten carbide. In this study, a low-cost desktop micro electro-chemical machining (ECM) was developed to investigate the characteristics of tungsten carbide micro-hole drilling. The performance parameters of the machining conditions by desktop micro-ECM, such as the machining time, material removal rate, relative tool wear rate, surface quality and dimensional accuracy, were also investigated in this study. The experimental results demonstrate that the low-cost desktop micro-ECM could fabricate micro-holes in the tungsten cemented carbide (WC-Co) workpiece.
Keywords: desktop micro-ECM; micro-hole; tungsten carbide WC.