Aerobic granular sludge was considered as a leading wastewater technology in the next century. However, the loss of granule stability limited the application of this promising biotechnology. Increasing aeration intensity and height to diameter (H/D) ratio were conventional strategies to enhance granule stability. In this study, hydraulic effects of aeration intensity and H/D ratio were explored basing on bubble behavior analysis. However, results revealed that due to viscous resistance, increasing aeration intensity and H/D ratio had limited effects on enhancing hydraulic shear stress, not to mention the extra operation and construction cost. A deflector component was further applied to regulate hydraulic shear stress on large granules under low aeration intensity and H/D ratio. Hydraulic shear stress of large granules was constantly around 3.0 times higher than that in the conventional reactor, resulting in higher percentage of granules within optimal size range (81.95 ± 5.13%). A high abundance of denitrifying bacteria was observed in reactors, which led to high TN removal efficiency of 88.6 ± 3.8%.
Keywords: Aeration intensity; Aerobic granular sludge; Bubble behavior; H/D ratio; Hydraulic shear stress.