This paper accounts for utilization of shear induced alignment method during ceramic stereolithography. Lateral oscillation mechanism, combined with 3d printed wall pattern, was employed to generate necessary shear to align fiber in desired direction. First, semicircular channel pattern was printed to assess the effect of difference between wall direction and oscillation direction on the fiber alignment. Then, flexural strength of ceramic matrix was tested with nickel coated carbon fiber and ceramic fiber reinforcements. The results demonstrated that the shear induced alignment further improves the flexural strength compare to randomly distributed samples. Flexural strength of aligned samples with 1.0 wt% carbon fiber loading was improved by ~90% compared to randomly orientated samples and by ~333% compared to unreinforced samples. Finally, fracture surface morphology of the flexural strength test specimens was evaluated. The main fracture mechanism was observed as fiber pull-out.
Keywords: Composites (B); Shaping (A); Sintering (A); Stereolithography.