Data on the effect of incorporation of nanoparticles and process characteristics of Ni-SiO2 coating on oil and gas steel

Paul Apeye Lucky Anawe; Ojo Sunday Isaac Fayomi

doi:10.1016/j.dib.2018.06.052

Data on the effect of incorporation of nanoparticles and process characteristics of Ni-SiO₂ coating on oil and gas steel

Data Brief. 2018 Jun 21:19:1768-1772. doi: 10.1016/j.dib.2018.06.052. eCollection 2018 Aug.

Authors

Paul Apeye Lucky Anawe¹, Ojo Sunday Isaac Fayomi^{2

3}

Affiliations

¹ Department of Petroleum Engineering, Covenant University, P.M.B. 1023, Ota, Nigeria.
² Department of Mechanical Engineering, Covenant University, P.M.B. 1023, Ota, Nigeria.
³ Department of Chemical, Metallurgical and Materials Engineering, Tshwane University of Technology, P.M.B. X680, Pretoria, South Africa.

Abstract

In this work, data on the effect of process parameter and particle concentration on the developed Ni-SiO₂ produced via electrocodeposition were presented. The influence of current density from 0.6 to 1.0 A/dm² and applied time difference from 10 to 25 min observed on the hardness characteristics and texture performance of the deposited alloy was checked. The weight gained and thickness of surface coverage was acquired and could be further used as a protoype for designing a ternary alloy coating system for oil and gas services.

Keywords: Applied current density; Coating thickness; Deposition time; Weight gain.