In the current study, calcination and thermo-chemical methods were applied in treatment of the processed diatomite fraction (<45 μm), which containing nearly 82.6 wt.% of the raw Egyptian diatomaceous earth. The untreated and modified diatomite fractions were characterized by optical microscopy (OM), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Thermo-chemical purification produced the highest concentration of diatom frustules (>92% SiO2) without blocking impurities and created SiOSi active sites. These fractions were tested for Methylene blue (MB) adsorption at different pH solutions (2.0-10.0). The purified diatomite via thermo-chemical treatment (PD) gave the greatest adsorption capacity for MB compared to the untreated (UD) and calcinated (CUD) diatomite fractions. Effects of experimental parameters such as MB concentration (60-200 mg L-1), contact time (5-480 min), adsorbent mass (50-250 mg) and temperature (30-55 °C) on MB uptake were investigated. Linear and non-linear forms of Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models indicated that Langmuir model with a maximum adsorption capacity (qmax=105.03mgg-1) fitted well the adsorption data. The chemical nature of MB uptake was revealed by the values of mean free energy E=8.655kJ/moland correlation coefficient of the pseudo-second-order model (R2=0.9997). The calculated thermodynamic parameters (ΔH0, ΔG0 and ΔS0) indicated that the removal of MB is spontaneous and endothermic.
Keywords: Adsorption characteristics; Diatomite fraction; Methylene blue; Thermodynamic parameters.
Copyright © 2018 Elsevier Inc. All rights reserved.