Leeches-Inspired Hydrogel-Elastomer Integration Materials

ACS Appl Mater Interfaces. 2018 Nov 21;10(46):40238-40245. doi: 10.1021/acsami.8b12886. Epub 2018 Nov 9.

Abstract

Inspired by the functions of leeches, for the first time homogeneous materials integrating hydrogels and elastomers were achieved by free radical polymerization. 2-Methoxyethyl acrylate (MEA) was used as elastomer monomer and Pluronics functionalized with vinyl groups acted as cross-linkers to impart the hydrogel property to the materials. The resulting Pluronic/PMEA gels possess a swelling ratio of about 210% and good water-retaining ability. Compression tests of Pluronic/PMEA gels at swelling equilibrium state show a stress up to 1.6 MPa under 85% strain. The gels act as elastomer after dehydration. Uniaxial tensile fracture stress and the elongation reached 1200 kPa and 500%, respectively, and compression stress was above 22 MPa. Furthermore, the Pluronic/PMEA gels also show self-healing properties. Owing to the excellent mechanical performance in both wet and dry conditions, this hydrogel-elastomer integrated material may have potential applications in tissue engineering, soft robotics, and biomedical devices.

Keywords: hydrogel−elastomer; micelle cross-linking; mimicry; self-healing; tough material.