Hydration mechanism of a calcium phosphate cement modified with phytic acid

Abstract

Calcium phosphate cements composed of β-tricalcium phosphate (β-TCP) and phosphoric acid were modified by addition of 5, 10, 12.5, 15 and 20 wt% phytic acid (IP6) related to the β-TCP content and compared to a reference containing 0.5 M citric acid monohydrate solution as setting regulator. The hydration reaction of these cements was investigated by isothermal calorimetry and in-situ X-ray diffraction at 23 °C and 37 °C. The cements were further characterized with respect to their injectability, rheology, zeta potential and time-resolved compressive strength development. Injectability was strongly improved by IP6 addition, while the maximum effect was already reached by the addition of 5 wt% IP6. This could be clearly related to an increase of the negative zeta potential leading to a mutual repulsion of cement particles. A further increase of the IP6 content had a detrimental effect on initial paste viscosity and shifted the gelation point to earlier time points. IP6 was further proven to act as a retarder for the cement setting reaction, whereas the effect was stronger for higher IP6 concentrations. Additionally, IP6 favoured the formation of monetite instead of brushite and a better mechanical performance compared to the IP6 free reference cement. STATEMENT OF SIGNIFICANCE: Calcium phosphate cements (CPCs) are clinically applied for bone repair due to their excellent biocompatibility and bone regeneration capacity. A deep understanding of the setting mechanism is the prerequisite for the targeted fabrication and application of such bone cements, whereas setting characteristics are usually adjusted by additives. Here, novel injectable CPC formulations were developed by modifying a cement composed of β-tricalcium phosphate and phosphoric acid with phytic acid (IP6). A detailed investigation of the setting mechanism of the IP6 modified CPCs is provided, which demonstrated the effectiveness of IP6 as setting regulator to adjust the reaction time and kind of setting product. Additionally, the high surface charge of cement particles after IP6 addition was effective in dispersing cement particles leading to low viscous cement pastes, which can be directly applied through a syringe for minimal invasive surgery.

Keywords: Calcium phosphate cement; In-situ XRD; Injectability; Phytic acid; Rheology.