Direct measurement of radiation pressure and circulating power inside a passive optical cavity

Opt Express. 2018 Sep 3;26(18):23492-23506. doi: 10.1364/OE.26.023492.

Abstract

A mechanical force sensor coupled to two optical cavities is developed as a metrological tool. This system is used to generate a calibrated circulating optical power and to create a transfer standard for externally coupled optical power. The variability of the sensor as a transfer standard for optical power is less than 2%. The uncertainty in using the sensor to measure the circulating power inside the cavity is less than 3%. The force measured from the mechanical response of the sensor is compared to the force predicted from characterizing the optical spectrum of the cavity. These two forces are approximately 20% different. Potential sources for this disagreement are analyzed and discussed. The sensor is compact, portable, and can operate in ambient and vacuum environments. This device provides a pathway to novel nanonewton scale force and milliwatt scale laser power calibrations, enables direct measurement of the circulating power inside an optical cavity, and enhances the sensitivity of radiation pressure-based optical power transfer standards.