The case of Frictional Torrefaction and the effect of reflux condensation on the operation of the Rotary Compression Unit

Abstract

This work introduces the process of Frictional Torrefaction and comes as a continuation to the previous work done on Frictional Pyrolysis, which is a novel method of pyrolysis that does not utilize heat but only friction and pressure. Both processes (i.e. Frictional Torrefaction and Frictional Pyrolysis) take place in a Rotary Compression Unit without and with a reflux condenser respectively. Rotating augers are used for the development of friction and the simultaneous increase of pressure. The following types of analysis were performed: TGA, BET, CHNS and HHV. Both products have similar heating values, around 21 MJ/kg. The elemental compositions are comparable but lower hydrogen content (3.5%) was measured for Frictional Torrefaction. BET analysis showed differences on the surface areas and porous sizes of the materials. Frictional Torrefaction has higher fixed carbon (31.23% vs 28.31%), higher surface area (58.16 m²/g vs 36.88 m²/g) and higher absorbance (35 cm³/g vs 26 cm³/g).

Keywords: Biomass; Characterization; Novel pyrolysis method; Steam explosion; Torrefaction.