A piezoelectric plate, poled along its thickness and supporting on its top and bottom surfaces a periodic grating of electrodes, is considered. An analytical model allowing band structure calculation is derived for the first symmetrical mode propagating along the length of the plate. Analytical results show that an electrical Bragg (EB) bandgap can be observed for this mode, depending on the electrical boundary conditions applied on the electrodes. This "EB bandgap" is associated with a discontinuity of the electric field between two successive unit cells. These results are validated with the numerical simulations based on the finite element method. Analytical and numerical results prove that the EB bandgap is highly tunable and can be optimized by changing the crystallographic orientation of the material. A simple tunable filter exploiting this bandgap is designed and fabricated. Experimental results of electrical impedance and electrical potential at the output together with a scanning laser vibrometer analysis are presented, which confirm the theoretical predictions.