This work developed a chronotherapeutic drug delivery system (CTDDS) utilizing a potential continuous hot-melt extrusion (HME) technique. Ketoprofen (KTP) and ibuprofen (IBU) were used as two separate model drugs. Eudragit S100 (ES100) was the matrix-forming agent, and ethyl cellulose (EC) (2.5 and 5%) was the release-retarding agent. A 16-mm extruder was used to develop the CTDDS to pilot scale. The obtained extrudate strands were transparent, indicating that the drugs were homogeneously dispersed in the matrix in an amorphous form, confirmed by both differential scanning calorimetry and powder X-ray diffraction. The strands were pelletized into 1, 2, and 3 mm size pellets. A 100% drug release from 1, 2, and 3 mm pellets with 2.5% EC was observed at 12, 14, and 16 h, whereas the drug release was sustained for 14, 16, and 22 h from 5% EC pellets, respectively, for KTP. The release characteristics of IBU were similar to those of KTP with modest variations in release at lag time. The in vitro drug release study conducted in three-stage dissolution media showed a desired lag time of 6 h. The percent drug release from 1, 2, and 3 mm pellets with 40% drug load showed < 20% release from all formulations at 6 h. The amount of ethyl cellulose and pellet size significantly affected drug release. Formulations of both KTP and IBU were stable for 4 months at accelerated stability conditions of 40°C/75% RH. In summary, HME is a novel technique for developing CTDDS.
Keywords: Eudragit S 100; arthritis; chronotherapeutic; drug delivery; hot-melt extrusion.