[Effects of recasting in vacuum with argon on the chemical composition of ceramic alloys]

Hua Xi Kou Qiang Yi Xue Za Zhi. 2018 Apr 1;36(2):174-177. doi: 10.7518/hxkq.2018.02.011.
[Article in Chinese]

Abstract

Objective: This study aimed to determine the effect of recasting in vacuum with argon on the chemical composition of cobalt-chromium (Co-Cr), commercially pure titanium (cpTi), palladium-based (Pd-based), and aurum-platinum (Au- Pt) ceramic alloys.

Methods: Without adding new alloys, Co-Cr, cpTi, Pd-based, and Au-Pt ceramic alloys were recast one to three times under the condition of vacuum compressive casting with argon. Before recasting, four previously cast ceramic alloys were treated with the corresponding method. After polishing, the chemical composition of the four ceramic alloys recasted one to three times were determined by energy-dispersive spectrometry.

Results: No significant difference was observed in the chemical composition of the four ceramic alloys recast 1-3 times (P>0.05).

Conclusions: Under the condition of vacuum with argon, the recasting had no obvious influence on the chemical composition of Co-Cr, cpTi, Pd-based, and Au-Pt ceramic alloys.

目的 研究真空加氩气环境中反复熔铸对4种常用非镍基烤瓷合金(钴铬、纯钛、钯基和金铂烤瓷合金)化学成分的影响。方法 真空加氩气保护环境下反复熔铸钴铬、纯钛、钯基和金铂烤瓷合金1~3次,每次再熔铸前对废旧合金均经过相应的再熔铸前处理,打磨抛光后,采用能谱仪检测4种烤瓷合金1~3次熔铸后的化学成分。结果 4种合金反复熔铸1~3次的化学成分含量变化均无统计学差异(P>0.05)。结论 真空加氩气环境中反复熔铸对钴铬、纯钛、钯基和金铂烤瓷合金的化学成分无明显影响。.

Keywords: ceramic alloy; chemical composition; recasting.

MeSH terms

  • Argon
  • Ceramics
  • Chromium Alloys
  • Dental Alloys
  • Dental Casting Technique*
  • Gold Alloys*
  • Materials Testing
  • Metal Ceramic Alloys
  • Surface Properties
  • Vacuum

Substances

  • Chromium Alloys
  • Dental Alloys
  • Gold Alloys
  • Metal Ceramic Alloys
  • Argon

Grants and funding

[基金项目] 福建医科大学附属口腔医院科技创新领军人才项目(2015-KQYY-LJ-3)