Controlling condensation conditions by surface topography is of prime interest. The aim of this work is to investigate the behavior of water droplets condensing on oriented sub-micrometric structures representing ripples with wavelengths around 800 nm. Droplet behavior was studied on different ripples heights and on untextured surfaces. It was specifically looked at how the presence of ripples creates geometrical confinement, and how that influences the deformation and the orientation of single droplets. Results show that the condensed droplets follow the orientation of textured features, especially with high structures height (150 nm). This is shown by the decreasing of droplet roundness with ripples height. The relative number of circular droplets (roundness near to 1) is around 0.6 for 70 nm high ripples and decrease to around 0.2 for 150 nm high ripples. The corresponding relative number on untextured surface is around 0.5. A mechanism, based on droplets pinning and hysteresis, is proposed to explain the influence of the ripples orientation in a vertical plane, onto the droplet deformation during coalescence step. Finally, the presence of ripples is shown to barely impact breath figure dynamics. Number of droplets and mean droplet radius for the textured and untextured surfaces present a comparable evolution.
Keywords: Dropwise condensation; Oriented structures; Polycarbonate; Ripples; Wettability.
Copyright © 2018 Elsevier Inc. All rights reserved.