MO detector (MOD): a dual-function optical modulator-detector for on-chip communication

Opt Express. 2018 Apr 2;26(7):8252-8259. doi: 10.1364/OE.26.008252.

Abstract

While augmenting network on chips (NoC) with photonic links enables high-bandwidth communication, the overhead for photonics is rather large, mainly driven by bulky footprints and the multi-functionality of transceivers. The latter requires, in addition to a photon source, signal modulation and detection. If the NoC were photonically augmented at every network point to enable all-to-all connectivity, the resulting photonic overhead would be excessive. Besides, the high bandwidth of a single optical bus may be sufficient to supply the data-sharing demand of a network. Spatial signal routing is a necessary function of data communication in NoCs. However, if photonic links are used to augment electronics, an energy-costly optical-electrical-optical (OEO) conversion is required since routing is currently executed in the electronic domain. Here we show a novel integrated broadband hybrid photonic-plasmonic device termed an MO detector featuring dual light modulation and detection. With 10 dB extinction ratio and 0.8 dB insertion loss at the modulation state and 0.7 A/W responsivity at the detection state based on the finite-different time-domain simulation, this transceiver-like device (i) eliminates the OEO conversion, (ii) reduces optical losses from photodetectors via bypassing the photodetector when not needed, and (iii) enables cognitive routing strategies for network-on-chips. As such, the MO detector acts as a micrometer-compact transceiver for next-generation NoCs.