Effect of Cu, Ni and Zn on Fe(II)-driven autotrophic denitrification

J Environ Manage. 2018 Jul 15:218:209-219. doi: 10.1016/j.jenvman.2018.04.050. Epub 2018 Apr 19.

Abstract

Fe(II)-mediated autotrophic denitrification in the presence of copper (Cu), nickel (Ni) and zinc (Zn) with four different microbial cultures was investigated in batch bioassays. In the absence of metals, complete nitrate removal and Fe(II) oxidation were achieved with a Thiobacillus-dominated mixed culture and Pseudogulbenkiania sp. 2002 after 7 d. A nitrate removal of 96 and 91% was observed with a pure culture of T. denitrificans and an activated sludge enrichment, respectively, after 10 d of incubation. Cu, Ni and Zn were then supplemented at an initial concentration of 5, 10, 20 and 40 mg Me/L. A decrease of approximately 50% of the soluble metal concentrations occurred in the first 4 d of denitrification, due to metal precipitation, co-precipitation, sorption onto iron (hydr)oxides, and probably sorption onto biomass. A higher sensitivity to metal toxicity was observed for the microbial pure cultures. Pseudogulbenkiania sp. 2002 was the least tolerant among the biomasses tested, resulting in only 6, 8 and 6% nitrate removal for the highest Cu, Ni and Zn concentrations, respectively. In contrast, the highest nitrate removal efficiency and specific rates were achieved with the Thiobacillus-dominated mixed culture, which better tolerated the presence of metals. Averagely, Cu resulted in the highest inhibition of nitrate removal, followed by Zn and Ni.

Keywords: Autotrophic denitrification; Ferrous iron; Heavy metals; Nitrate; Toxicity.

MeSH terms

  • Autotrophic Processes
  • Copper
  • Denitrification*
  • Ferrous Compounds
  • Metals, Heavy / chemistry*
  • Nickel
  • Zinc

Substances

  • Ferrous Compounds
  • Metals, Heavy
  • Copper
  • Nickel
  • Zinc