Synthesis, characterization and sonocatalytic applications of nano-structured carbon based TiO2 catalysts

Jongbok Choi; Mingcan Cui; Yonghyeon Lee; Jeonggwan Kim; Yeomin Yoon; Min Jang; Jeehyeong Khim

doi:10.1016/j.ultsonch.2018.01.010

Synthesis, characterization and sonocatalytic applications of nano-structured carbon based TiO₂ catalysts

Ultrason Sonochem. 2018 May:43:193-200. doi: 10.1016/j.ultsonch.2018.01.010. Epub 2018 Jan 9.

Authors

Jongbok Choi¹, Mingcan Cui¹, Yonghyeon Lee¹, Jeonggwan Kim², Yeomin Yoon³, Min Jang⁴, Jeehyeong Khim⁵

Affiliations

¹ School of Civil, Environmental, and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
² Korea Environmental Industry and Technology, Seoul 03367, Republic of Korea.
³ Department of Civil and Environmental Engineering, University of South Carolina, Columbia, SC 29208, USA.
⁴ Department of Environmental Engineering, Kwangwoon University, 447-1 Wolgye-Dong Nowon-Gu, Seoul, Republic of Korea. Electronic address: minjang@kw.ac.kr.
⁵ School of Civil, Environmental, and Architectural Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea. Electronic address: hyeong@korea.ac.kr.

PMID: 29555275
DOI: 10.1016/j.ultsonch.2018.01.010

Abstract

In order to enhance sonocatalytic oxidation of a recalcitrant organic pollutant, rhodamine B (RhB), it is necessary to study the fundamental aspects of sonocatalysis. In this study, TiO₂-incorporated nano-structured carbon (i.e., carbon nanotubes (CNTs) or graphene (GR)) composites were synthesized by coating TiO₂ on CNTs or GR of different mass percentages (0.5, 1, 5, and 10 wt%) by a facile hydrothermal method. The sonocatalytic degradation rates of RhB were examined for the effect of ultrasound (US) frequency and calcination temperature by using the prepared TiO₂-NSC composites. Since US frequency affected the sonoluminescence (SL) intensities, it was proposed that there exists a correlation between the surface area or band-gap of the sonocatalysts and the degradation kinetic constants of RhB. In addition, the reusability of TiO₂-GR composites was also investigated. Overall, the performance of TiO₂-GRs prepared by the hydrothermal method was better than that of calcined TiO₂-CNTs. Among TiO₂-GRs, 5% GR incorporated media (TiO₂-GR-5) showed the best performance. Interestingly, the kinetic constants of sonocatalysts prepared under hydrothermal conditions had a negative linear relationship with the band-gap energy for the corresponding media. Furthermore, the strongest SL intensity and highest degradation rates of RhB for both carbonaceous composites were observed at 500 kHz. The kinetic constants of calcined media decreased linearly as the specific area of the media decreased, while the band-gap energy could not be correlated with the kinetic constants. The GR combined TiO₂ composite might be a good sonocatalyst in wastewater treatment using ultrasound-based oxidation because of its high stability.

Keywords: Carbon nanotubes; Graphene; Hydrothermal; Kinetic; Sonocatalytic; Sonoluminescence.