On the Precise Tuning of Optical Filtering Features in Nanoporous Anodic Alumina Distributed Bragg Reflectors

Cheryl Suwen Law; Siew Yee Lim; Abel Santos

doi:10.1038/s41598-018-22895-5

On the Precise Tuning of Optical Filtering Features in Nanoporous Anodic Alumina Distributed Bragg Reflectors

Sci Rep. 2018 Mar 15;8(1):4642. doi: 10.1038/s41598-018-22895-5.

Authors

Cheryl Suwen Law^{1

2

3}, Siew Yee Lim^{1

2

3}, Abel Santos^{4

5

6}

Affiliations

¹ School of Chemical Engineering, The University of Adelaide, Adelaide, SA 5005, Australia.
² Institute for Photonics and Advanced Sensing (IPAS), The University of Adelaide, 5005, Adelaide, Australia.
³ ARC Centre of Excellence for Nanoscale BioPhotonics (CNBP), The University of Adelaide, 5005, Adelaide, Australia.
⁴ School of Chemical Engineering, The University of Adelaide, Adelaide, SA 5005, Australia. abel.santos@adelaide.edu.au.
⁵ Institute for Photonics and Advanced Sensing (IPAS), The University of Adelaide, 5005, Adelaide, Australia. abel.santos@adelaide.edu.au.
⁶ ARC Centre of Excellence for Nanoscale BioPhotonics (CNBP), The University of Adelaide, 5005, Adelaide, Australia. abel.santos@adelaide.edu.au.

Abstract

This study presents a nanofabrication approach that enables the production of nanoporous anodic alumina distributed Bragg reflectors (NAA-DBRs) with finely engineered light filtering features across the spectral regions. The photonic stopband (PSB) of these NAA-based photonic crystal (PC) structures is precisely tuned by an apodization strategy applied during stepwise pulse anodization with the aim of engineering the effective medium of NAA-DBRs in depth. We systematically assess the effect of different fabrication parameters such as apodization function (i.e. linear positive, linear negative, logarithmic positive and logarithmic negative), amplitude difference (from 0.105 to 0.420 mA cm^-2), current density offset (from 0.140 to 0.560 mA cm^-2), anodization period (from 1100 to 1700 s), and pore widening time (from 0 to 6 min) on the quality and central wavelength of the PSB of NAA-DBRs. The PSB's features these PC structures are demonstrated to be highly tunable with the fabrication parameters, where a logarithmic negative apodization is found to be the most effective function to produce NAA-DBRs with high quality PSBs across the UV-visible-NIR spectrum. Our study establishes that apodized NAA-DBRs are more sensitive to changes in their effective medium than non-apodized NAA-DBRs, making them more suitable sensing platforms to develop advanced optical sensing systems.