Effect of employing ultrasonic waves during pulse electrochemical deposition on the characteristics and biocompatibility of calcium phosphate coatings

Abstract

In the present work, we investigated the effect of employing ultrasonic waves during pulse electrochemical deposition on surface topography, chemical composition and biocompatibility of calcium phosphate (Ca-P) coatings. The SEM and 3D AFM images showed that the anodized titanium surface was covered with the uniform and refined size of plate-like Ca-P crystals, when the ultrasonic treatment of the electrolyte with power of 60 W was carried out during deposition. In contrast, for the Ca-P; 0 W coating applied under only the magnetic stirring of the electrolyte, the microstructure was non-uniform and some Ca-P crystals with the larger size were randomly observed in different regions, causing a rougher surface. The FTIR results also revealed that employing the ultrasound increases the deposition of a coating involved in only the most stable Ca-P phase of carbonated hydroxyapatite (CHA). However, in the absence of ultrasound, besides the prominent phase of CHA, some less stable Ca-P phases like octa calcium phosphate (OCP) and brushite were also formed in the Ca-P; 0 W coating. The Ca-P; 60 W coating showed the higher ability for apatite biomineralization after a 7-day immersion in the simulated body fluid (SBF). This coating also provided a better surface for the cellular activity, as compared to the Ca-P; 0 W coating.

Keywords: Apatite biomineralization; Biocompatibility; Calcium phosphate coating; Pulse electrochemical deposition; Ultrasonic waves.