Because of their structural and compositional flexibility, perovskite oxides represent an attractive alternative electrocatalyst class to precious metals for the oxygen reduction reaction (ORR); an important reaction in fuel cells and metal-air batteries. Partial replacement of the original metal cation with another cation, namely, doping, can be used to tailor the ORR activity of perovskite, for which a metal has been exclusively used as the dopant component in the past. Herein, phosphorus is proposed as a non-metal dopant for the cation site to develop a new perovskite family with the formula of La0.8 Sr0.2 Mn1-x Px O3-δ (x=0, 0.02, 0.05, and 0.1; denoted as LSM, LSMP0.02, LSMP0.05, and LSMP0.1, respectively). Powder XRD patterns reveal that the solubility of phosphorus in the perovskite structure is around 0.05. Rotating ring-disk electrode experiments in the form of linear-sweep voltammetry scans demonstrated the best ORR performance for LSMP0.05, and also revealed close to a four-electron ORR pathway for all four compositions. A chronoamperometric test (9000 s) and 500 cycle accelerated durability test demonstrated higher durability for LSMP0.05 relative to that of LSM and the commercial 20 wt % Pt/C catalyst. The higher ORR activity for LSMP0.05 is attributed to the optimised average valence of Mn, as evidenced by combined X-ray photoelectron spectroscopy and soft X-ray absorption spectroscopy data. Doping phosphorus into perovskites is an effective way to develop high-performance electrocatalysts for ORR.
Keywords: cations; doping; electrochemistry; perovskite phases; phosphorus.
© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.