Apple pomace was studied as a possible raw material for biobutanol production. Five different soft physicochemical pretreatments (autohydrolysis, acids, alkalis, organic solvents and surfactants) were compared in a high-pressure reactor, whose working parameters (temperature, time and reagent concentration) were optimised to maximise the amount of simple sugars released and to minimise inhibitor generation. The pretreated biomass was subsequently subjected to a conventional enzymatic treatment to complete the hydrolysis. A thermal analysis (DSC) of the solid biomass indicated that lignin was mainly degraded during the enzymatic treatment. The hydrolysate obtained with the surfactant polyethylene glycol 6000 (PEG 6000) (1.96% w/w) contained less inhibitors than any other pretreatment, yet providing 42 g/L sugars at relatively mild conditions (100 °C, 5 min), and was readily fermented by Clostridium beijerinckii CECT 508 in 96 h (3.55 g/L acetone, 9.11 g/L butanol, 0.26 g/L ethanol; 0.276 gB/gS yield; 91% sugar consumption). Therefore, it is possible to optimise pretreatment conditions of lignocellulosic apple pomace to reduce inhibitor concentrations in the final hydrolysate and perform successful ABE fermentations without the need of a detoxification stage.
Keywords: ABE fermentation; Apple pomace; Biorefinery; DSC; Lignocellulosic wastes; Pretreatment.