Automated multi-filtration cleanup with nitrogen-enriched activated carbon material as pesticide multi-residue analysis method in representative crop commodities

Abstract

An automated multi-filtration cleanup (Auto m-FC) method with nitrogen-enriched activated carbon material based on modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) extracts was developed. It was applied to pesticide multi-residue analysis in six representative crop commodities. The automatic device was aimed to improve the cleanup efficiency and reduce manual operation workload in cleanup step. By controlling extracts volume, flow rate and Auto m-FC cycles, the device could finish cleanup process accurately. In this work, nitrogen-enriched activated carbon mixed with alternative sorbents and anhydrous magnesium sulfate (MgSO₄) was packed in a column for Auto m-FC and followed by liquid chromatography with tandem mass spectrometric (LC-MS/MS) detection. This newly developed carbon material showed excellent cleanup performance. It was validated by analyzing 23 pesticides in six representative matrices spiked at two concentration levels of 10 and 100μg/kg. Water addition volume, salts, sorbents, Auto m-FC procedure including the flow rate and the Auto m-FC cycles for each matrix were optimized. Then, three general Auto m-FC methods were introduced to high water content, high oil and starch content, difficult commodities. Spike recoveries were within 82 and 106% and 1-14% RSD for all analytes in the tested matrices. Matrix-matched calibrations were performed with the coefficients of determination over 0.997 between concentration levels of 10 and 1000μg/kg. The developed method was successfully applied to the determination of pesticide residues in market samples.

Keywords: Auto m-FC; LC–MS/MS; Nitrogen-enriched activated carbon; Pesticide multi-residue analysis.