Chemical and structural characterization of char development during lignocellulosic biomass pyrolysis

Bioresour Technol. 2017 Nov:243:941-948. doi: 10.1016/j.biortech.2017.07.017. Epub 2017 Jul 6.

Abstract

The chemical and structural changes of three lignocellulosic biomass samples during pyrolysis were investigated using both conventional and advanced characterization techniques. The use of ATR-FTIR as a characterization tool is extended by the proposal of a method to determine aromaticity, the calculation of both CH2/CH3 ratio and the degree of aromatic ring condensation ((R/C)u). With increasing temperature, the H/C and O/C ratios, XA and CH2/CH3 ratio decreased, while (R/C)u and aromaticity increased. The micropore network developed with increasing temperature, until the coalescence of pores at 1100°C, which can be linked to increasing carbon densification, extent of aromatization and/or graphitization of the biomass chars. WAXRD-CFA measurements indicated the gradual formation of nearly parallel basic structural units with increasing carbonization temperature. The char development can be considered to occur in two steps: elimination of aliphatic compounds at low temperatures, and hydrogen abstraction and aromatic ring condensation at high temperatures.

Keywords: ATR-FTIR; Aromaticity; Biochar; CPMAS (13)C NMR; Pyrolysis.

MeSH terms

  • Biomass*
  • Carbon
  • Charcoal
  • Hot Temperature
  • Hydrogen*
  • Lignin
  • Temperature

Substances

  • lignocellulose
  • Charcoal
  • Carbon
  • Hydrogen
  • Lignin