A Digitally Dynamic Power Supply Technique for 16-Channel 12 V-Tolerant Stimulator Realized in a 0.18- μm 1.8-V/3.3-V Low-Voltage CMOS Process

IEEE Trans Biomed Circuits Syst. 2017 Oct;11(5):1087-1096. doi: 10.1109/TBCAS.2017.2713122. Epub 2017 Jul 18.

Abstract

A new digitally dynamic power supply technique for 16-channel 12-V-tolerant stimulator is proposed and realized in a 0.18-μm 1.8-V/3.3-V CMOS process. The proposed stimulator uses four stacked transistors as the pull-down switch and pull-up switch to withstand 4 times the nominal supply voltage (4 × V DD). With the dc input voltage of 3.3 V, the regulated three-stage charge pump, which is capable of providing 11.3-V voltage at 3-mA loading current, achieves dc conversion efficiency of up to 69% with 400-pF integrated capacitance. Power consumption is reduced by implementing the regulated charge pump to provide a dynamic dc output voltage with a 0.5-V step. The proposed digitally dynamic power supply technique, which is implemented by using a p-type metal oxide semiconductor (PMOS) inverter with pull-down current source and digital controller, greatly improves the power efficiency of a system. The silicon area of the stimulator is approximately 3.5 mm2 for a 16-channel implementation. The functionalities of the proposed stimulator have been successfully verified through animal test.

MeSH terms

  • Animals
  • Electric Capacitance*
  • Electric Power Supplies*
  • Equipment Design
  • Implantable Neurostimulators*