A multi-component acrylate-based copolymer system especially designed for application as ocular lenses is developed through free-radical, bulk polymerization of a system containing hydroxyethyl methacrylate, methyl methacrylate, triethylene glycol dimethacrylate, dimethyl itaconate, 3-(trimethoxysilyl) propylmethacrylate, Polyhedraloligomeric silsesquioxane-acrylate (POSS-acrylate) and AIBN as an initiator. The progress of the reaction was monitored by Fourier transform infrared spectroscopy (FTIR). The effect of increasing concentration of the components on the hardness of the synthesized lenses was measured by Shore Durometer before and after immersion in PBS solutions. Extraction test method was performed to analyze the biocompatibility of the fabricated lenses. In this research the Taguchi method was employed to achieve the optimal hardness property which plays a critical role in final application of the lens materials. The Taguchi trial for ocular lens hardness was configured in an L16 orthogonal array, by five control factors, each with four level settings. The results showed that 3-(trimethoxysilyl) propyl methacrylate decreases and 2-hydroxyethylmethacrylate increases, polyhedraloligomeric silsesquioxane with a cage-like structure, methyl methacrylate and dimethyl itaconate increase the hardness. Proliferation and growth of the cells showed that there is no toxic substance extracted from the lenses which can interfere with the cell growth.
Keywords: Contact lens; Hardness; Polyhedraloligomeric silsesquioxane-acrylate; Silicone acrylate; Taguchi method.