White light produced by blue LEDs with yellow phosphor is the most widely used methods, but it results in poor quality in angular CCT uniformity. In this work, a novel technique was introduced to solve this problem by integrating different ZnO nanostructures into white light-emitting diodes. The experiment of ZnO doped films and the simulation of Finite-Difference Time-Domain (FDTD) were carried out. The result indicated scattering effect of ZnO nanoparticles could improve uniformity of scattering energy effectively. Moreover, the effect of ZnO nanostructures on white light-emitting diodes (wLEDs) devices was also investigated. The CCT deviation of wLEDs devices would decrease from 3455.49 K to 96.30 K, 40.03 K and 60.09 K when the node-like (N-ZnO), sheet-like (S-ZnO) and rod-like ZnO (R-ZnO) respectively applied. The higher CCT uniformity and little luminous flux dropping were achieved when the optimal concentrations of N-ZnO, S-ZnO, and R-ZnO nanostructures were 0.25%, 0.75%, and 0.25%. This low-cost and green manufacturing method has a great impact on development of white light-emitting diodes.