We report on the mitigation of curtaining artifacts during transmission electron microscopy (TEM) lamella preparation by means of a modified ion beam milling approach, which involves altering the incident angle of the Ga ions by rocking of the sample on a special stage. We applied this technique to TEM sample preparation of a state-of-the-art integrated circuit based on a 14-nm technology node. Site-specific lamellae with a thickness <15 nm were prepared by top-down Ga focused ion beam polishing through upper metal contacts. The lamellae were analyzed by means of high-resolution TEM, which showed a clear transistor structure and confirmed minimal curtaining artifacts. The results are compared with a standard inverted thinning preparation technique.
Keywords: FinFET device; TEM sample; integrated circuit; lamella.