Assessment of Particle Pollution from Jetliners: from Smoke Visibility to Nanoparticle Counting

Environ Sci Technol. 2017 Mar 21;51(6):3534-3541. doi: 10.1021/acs.est.6b05801. Epub 2017 Mar 6.

Abstract

Aviation is a substantial and a fast growing emissions source. Besides greenhouse gases, aircraft engines emit black carbon (BC), a climate forcer and air pollutant. Aviation BC emissions have been regulated and estimated through exhaust smoke visibility (smoke number). Their impacts are poorly understood because emission inventories lack representative data. Here, we measured BC mass and number-based emissions of the most popular airliner's engines according to a new emission standard. We used a calibrated engine performance model to determine the emissions on the ground, at cruise altitude, and over entire flight missions. Compared to previous estimates, we found up to a factor of 4 less BC mass emitted from the standardized landing and takeoff cycle and up to a factor of 40 less during taxiing. However, the taxi phase accounted for up to 30% of the total BC number emissions. Depending on the fuel composition and flight distance, the mass and number-based emission indices (/kg fuel burned) were 6.2-14.7 mg and 2.8 × 1014 - 8.7 × 1014, respectively. The BC mass emissions per passenger-km were similar to gasoline vehicles, but the number-based emissions were relatively higher, comparable to old diesel vehicles. This study provides representative data for models and will lead to more accurate assessments of environmental impacts of aviation.

Publication types

  • Research Support, Non-U.S. Gov't
  • Research Support, U.S. Gov't, Non-P.H.S.

MeSH terms

  • Air Pollutants
  • Gasoline
  • Particulate Matter*
  • Smoke*
  • Soot
  • Vehicle Emissions

Substances

  • Air Pollutants
  • Gasoline
  • Particulate Matter
  • Smoke
  • Soot
  • Vehicle Emissions