Direct catalytic production of sorbitol from waste cellulosic materials

Bioresour Technol. 2017 May:232:152-158. doi: 10.1016/j.biortech.2017.02.008. Epub 2017 Feb 8.

Abstract

Cotton wool, cotton textile, tissue paper and printing paper, all potential waste cellulosic materials, were directly converted to sorbitol using a Ru/CNT catalyst in the presence of H2 and using only water as solvent, without any acids. Conversions up to 38% were attained for the raw substrates, with sorbitol yields below 10%. Ball-milling of the materials disrupted their crystallinity, allowing reaching 100% conversion of cotton wool, cotton textile and tissue paper after 4h, with sorbitol yields around 50%. Mix-milling these materials with the catalyst greatly enhanced their conversion rate, and the materials were efficiently converted to sorbitol with a yield around 50% in 2h. However, ball- and mix-milled printing paper presented a conversion of only 50% after 5h, with sorbitol yields of 7%. Amounts of sorbitol of 0.525, 0.511 and 0.559g could be obtained from 1g of cotton wool, cotton textile and tissue paper, respectively.

Keywords: Biomass conversion; Cellulosic materials; Cotton; Paper; Sorbitol.

MeSH terms

  • Air
  • Biotechnology / methods*
  • Catalysis
  • Cellulose / chemistry*
  • Nitrogen / chemistry
  • Sorbitol / metabolism*
  • Thermogravimetry
  • Titanium / pharmacology
  • Waste Products*

Substances

  • Waste Products
  • titanium dioxide
  • Sorbitol
  • Cellulose
  • Titanium
  • Nitrogen