Determination of the Relative Effectiveness of Four Food Additives in Degrading Aflatoxin in Distillers Wet Grains and Condensed Distillers Solubles

J Food Prot. 2017 Jan;80(1):90-95. doi: 10.4315/0362-028X.JFP-16-092.

Abstract

The food additives sodium bisulfite, sodium hypochlorite, citric acid, and ammonium persulfate were evaluated for their effectiveness in degrading aflatoxin in samples of distillers wet grains (DWG) and condensed distillers solubles (CDS) obtained from an industrial ethanol plant. Aqueous food additive solutions, 0.5% by weight, were added to DWG or CDS at the level of 0.5 ml/g of sample, and the materials were heated at 90°C for 1 h. Sodium bisulfite was not effective in degrading aflatoxin in either DWG or CDS. Among the four food additives tested, sodium hypochlorite was the most effective. However, it bleached the substrate and left an off-odor. Citric acid and ammonium persulfate reduced aflatoxin levels by 31 to 51%. Citric acid is the most promising additive for degrading aflatoxin because it has been classified as generally recognized as safe by the U.S. Food and Drug Administration. Aflatoxin reduction was enhanced by increasing the citric acid addition level and prolonging the heating time. Reductions of 65 and 80% in DWG and CDS, respectively, were obtained by the addition of 2.5% (by weight) citric acid and heating at 90°C for 1 h. Aflatoxin levels in DWG and CDS were gradually reduced with prolonged heating at 90°C, even without the addition of food additives. Aflatoxin reductions of 53 and 73% were achieved in DWG and CDS as a result of heating at 90°C for 5 h.

Keywords: Ammonium persulfate; Citric acid; Lateral flow device; Mycotoxin degradation; Mycotoxins; Sodium bisulfate.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Aflatoxins*
  • Animal Feed
  • Ethanol
  • Food Additives*
  • Solvents
  • Zea mays

Substances

  • Aflatoxins
  • Food Additives
  • Solvents
  • Ethanol