On the van der Pauw's method applied to the measurement of low thermal conductivity materials

C Morales; E Flores; J Bodega; F Leardini; I J Ferrer; J R Ares; C Sánchez

doi:10.1063/1.4960331

On the van der Pauw's method applied to the measurement of low thermal conductivity materials

Rev Sci Instrum. 2016 Aug;87(8):084902. doi: 10.1063/1.4960331.

Authors

C Morales¹, E Flores², J Bodega², F Leardini², I J Ferrer², J R Ares², C Sánchez²

Affiliations

¹ Departamento Física Aplicada, Universidad Autónoma de Madrid, Madrid 28049, Spain.
² Departamento Física de Materiales, Universidad Autónoma de Madrid, Madrid 28049, Spain.

PMID: 27587145
DOI: 10.1063/1.4960331

Abstract

The electrical van der Pauw's method has recently been extended to measure the thermal conductivity of different elements and compounds. This technique provides an easy way to determine the sample in-plane thermal conductivity by avoiding the influence of the thermal contact resistances. However, the reported calculated error values appear to be underestimated when dealing with the materials with low thermal conductivity (<5 W/Km) at room temperature. The causes of this underestimation are investigated in this communication and it has been found that they are due to the drastic influence of conduction heat losses through the thermo-resistance wires as well as the resulting modification of the sample temperature map. Both phenomena lead to experimental values of the sample thermal conductivity, which are systematically higher than the tabulated ones. The magnitude of this systematic error is ∼100% dealing with the samples of macroscopic dimensions, and low thermal conductivity indicated that the obtained accurate measurements can be quite challenging.