Morphologically optimized LiNi0.5 Mn1.5 O4 (LMNO-0) particles were treated with LiNbO3 to prepare a homogeneously coated material (LMNO-Nb) as cathode in batteries. Graphite/LMNO-Nb full cells present a twofold higher cycling life than cells assembled using uncoated LMNO-0 (graphite/LMNO-0 cell): Graphite/LMNO-0 cells achieve 80 % of the initial capacity after more than 300 cycles whereas for graphite/LMNO-Nb cells this is the case for more than 600 cycles. Impedance spectroscopy measurements reveal significantly lower film and charge-transfer resistances for graphite/LMNO-Nb cells than for graphite/LMNO-0 cells during cycling. Reduced resistances suggest slower aging related to film thickening and increase of charge-transfer resistances when using LMNO-Nb cathodes. Tests at 45 °C confirm the good electrochemical performance of the investigated graphite/LMNO cells while the cycling stability of full cells is considerably lowered under these conditions.
Keywords: batteries; coatings; high-voltage cathode; lithium; spinel phase.
© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.