Traditional leukocyte adhesion assays have provided significant insight into the mechanisms of leukocyte rolling in part through the use of homogeneously coated surfaces. These assays typically involve protein coating of glass coverslips or plastic petri dishes applied via a static drop of protein solution. With this approach, it is difficult to spatially control the location of proteins to fabricate surface-bound protein gradients that mimic in vivo situations. Microfluidic patterning of proteins with microfluidic devices has become a popular technique due to the ability to spatially pattern proteins on a cellular scale. Despite the advantages of microfluidic patterning, few studies have systematically investigated the effects of perfusion time, protein concentration, and perfusion shear stress on protein deposition. Herein, we demonstrated the fabrication of both line and step gradients of P-selectin on glass substrates that support cell rolling and adhesion assays. Investigation of the flow conditions during the microfluidic patterning led to several significant findings. We observed that the protein deposition time of 5 min was sufficient to deposit adequate P-selectin to support neutrophil rolling. We demonstrated that the amount of membrane P-selectin (mP-selectin) or recombinant P-selectin (rP-selectin) deposited showed a dependence on the perfusion shear stress between 4.0 and 32.0 dyn/cm(2), while similar studies with fibronectin or fibrinogen showed no shear stress dependence. Finally, we also created step changes in surface adherent protein concentration of P-selectin to characterize leukocyte-rolling behavior in response to sudden changes in ligand density.