Animal Slurry Acidification Affects Particle Size Distribution and Improves Separation Efficiency

Abstract

Solid-liquid separation is performed to improve slurry management, and acidification of the slurry is used to reduce ammonia emissions. Acidification is known to affect slurry characteristics, and we hypothesized that it may affect mechanical separation. Our objective in this study was to assess the effects of slurry acidification on particle size distribution and separation efficiency. Two types of slurry, aged pig and fresh dairy, and two different acidification additives, sulfuric acid and aluminum sulfate (alum), were studied. We found that acidification with sulfuric acid promoted phosphorus (P) solubilization for both slurries, but no change was observed with alum. More ammonium was found in the acidified dairy slurry compared with raw dairy slurry, but no difference was found in aged pig slurry. Acidification before separation increased the proportion of the solid fraction in the slurries, and the effect was significantly higher with alum. When alum was used to acidify the slurries, the proportion of particles larger than 100 μm increased significantly, as did the P concentration in this particle size range. The efficiency of P separation increased markedly in both slurries when alum was used, with the removal to the solid fraction of the dairy slurry being almost complete (90%). Because the priority in mechanical separation is to increase the P content in the solid fraction, the use of alum before centrifugation may be the most suitable option for enhancing its nutrient content. We conclude that separation efficiency and particle size distribution are significantly affected by acidification, but the extent of the effects depends on slurry type and on the type of additive used for acidification.