Lipid extraction from microalgae cell using persulfate-based oxidation

Bioresour Technol. 2016 Jan:200:1073-5. doi: 10.1016/j.biortech.2015.10.106. Epub 2015 Nov 4.

Abstract

In this study, persulfate, a solid-type oxidant, was adopted as a substitute for hydrogen peroxide in extracting lipid from microalgae biomass. Microalgae cells were concentrated at pH 3 and with 200mg/L of ferric chloride, conditions which can activate oxidants such as hydrogen peroxide and persulfate. At a persulfate concentration of 2mM and a reaction temperature of 90°C, exceedingly high extraction efficiency over 95% was obtained, which was higher than with 0.5% hydrogen peroxide at the same temperature. This result showed that persulfate is sufficiently powerful and incomparably cheap enough to replace the potent yet expensive oxidant. It appears that combining iron-based coagulation and persulfate-based lipid extraction is indeed a competitive approach that can possibly lighten the process burden for the microalgae-derived biodiesel production.

Keywords: Fenton-like reaction; Lipid extraction; Microalgae; Oxidation; Persulfate.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Biofuels*
  • Biomass
  • Chemical Fractionation / methods*
  • Chlorella / chemistry*
  • Chlorides / chemistry
  • Ferric Compounds / chemistry
  • Hydrogen Peroxide / chemistry
  • Hydrogen-Ion Concentration
  • Lipids / chemistry
  • Lipids / isolation & purification*
  • Microalgae / chemistry*
  • Oxidation-Reduction
  • Sodium Compounds / chemistry
  • Sulfates / chemistry
  • Temperature

Substances

  • Biofuels
  • Chlorides
  • Ferric Compounds
  • Lipids
  • Sodium Compounds
  • Sulfates
  • Hydrogen Peroxide
  • sodium persulfate
  • ferric chloride