Sequential injection system with multi-parameter analysis capability for water quality measurement

Natcha Kaewwonglom; Jaroon Jakmunee

doi:10.1016/j.talanta.2015.07.005

Sequential injection system with multi-parameter analysis capability for water quality measurement

Talanta. 2015 Nov 1:144:755-62. doi: 10.1016/j.talanta.2015.07.005. Epub 2015 Jul 4.

Authors

Natcha Kaewwonglom¹, Jaroon Jakmunee²

Affiliations

¹ Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
² Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand; Center of Excellence for Innovation in Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand. Electronic address: jaroon.jakmunee@cmu.ac.th.

PMID: 26452887
DOI: 10.1016/j.talanta.2015.07.005

Abstract

A simple sequential injection (SI) system with capability to determine multi-parameter has been developed for the determination of iron, manganese, phosphate and ammonium. A simple and compact colorimeter was fabricated in the laboratory to be employed as a detector. The system was optimized for suitable conditions for determining each parameter by changing software program and without reconfiguration of the hardware. Under the optimum conditions, the methods showed linear ranges of 0.2-10 mg L(-1) for iron and manganese determinations, and 0.3-5.0 mg L(-1) for phosphate and ammonium determinations, with correlation coefficients of 0.9998, 0.9973, 0.9987 and 0.9983, respectively. The system provided detection limits of 0.01, 0.14, 0.004 and 0.02 mg L(-1) for iron, manganese, phosphate and ammonium, respectively. The proposed system has good precision, low chemical consumption and high throughput. It was applied for monitoring water quality of Ping river in Chiang Mai, Thailand. Recoveries of the analysis were obtained in the range of 82-119%.

Keywords: Ammonium; Iron; Manganese; Multi-parameter; Phosphate; Ping river; Sequential injection analysis; Water quality.