We have fabricated a bilayer molybdenum disulphide (MoS2) transistor on boron nitride (BN) substrate and performed Raman spectroscopy and electrical measurements with this device. The characteristic Raman peaks show an upshift about 2.5 cm(-1) with the layer lying on BN, and a narrower line width in comparison with those on a SiO2 substrate. The device has a maximum drain current larger than 1 μA and a high current on/off ratio of greater than 10(8). In the temperature range of 100 K-293 K, the two terminal gate effect mobility and the carrier density do not change significantly with temperature. Results of the Raman and electrical measurements reveal that BN is a suitable substrate for atomic layer electrical devices.