Efficient selective catalytic reduction of NO by novel carbon-doped metal catalysts made from electroplating sludge

Environ Sci Technol. 2014 Oct 7;48(19):11497-503. doi: 10.1021/es502391y. Epub 2014 Sep 26.

Abstract

Electroplating sludges, once regarded as industrial wastes, are precious resources of various transition metals. This research has thus investigated the recycling of an electroplating sludge as a novel carbon-doped metal (Fe, Ni, Mg, Cu, and Zn) catalyst, which was different from a traditional carbon-supported metal catalyst, for effective NO selective catalytic reduction (SCR). This catalyst removed >99.7% NO at a temperature as low as 300 °C. It also removed NO steadily (>99%) with a maximum specific accumulative reduced amount (MSARA) of 3.4 mmol/g. Gas species analyses showed that NO removal was accompanied by evolving N2 and CO2. Moreover, in a wide temperature window, the sludge catalyst showed a higher CO2 selectivity (>99%) than an activated carbon-supported metal catalyst. Structure characterizations revealed that carbon-doped metal was transformed to metal oxide in the sludge catalyst after the catalytic test, with most carbon (2.33 wt %) being consumed. These observations suggest that NO removal over the sludge catalyst is a typical SCR where metals/metal oxides act as the catalytic center and carbon as the reducing reagent. Therefore, our report probably provides an opportunity for high value-added utilizations of heavy-metal wastes in mitigating atmospheric pollutions.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Carbon / chemistry*
  • Catalysis
  • Electroplating*
  • Industrial Waste / analysis*
  • Metals / chemistry*
  • Nitric Oxide / chemistry*
  • Sewage / chemistry*
  • Temperature
  • X-Ray Diffraction

Substances

  • Industrial Waste
  • Metals
  • Sewage
  • Nitric Oxide
  • Carbon