Fracture mechanics analyses of ceramic/veneer interface under mixed-mode loading

J Mech Behav Biomed Mater. 2014 Nov:39:119-28. doi: 10.1016/j.jmbbm.2014.07.019. Epub 2014 Jul 29.

Abstract

Few studies have focused on the interface fracture performance of zirconia/veneer bilayered structure, which plays an important role in dental all-ceramic restorations. The purpose of this study was to evaluate the fracture mechanics performance of zirconia/veneer interface in a wide range of mode-mixities (at phase angles ranging from 0° to 90°), and to examine the effect of mechanical properties of the materials and the interface on the fracture initiation and crack path of an interfacial crack. A modified sandwich test configuration with an oblique interfacial crack was proposed and calibrated to choose the appropriate geometry dimensions by means of finite element analysis. The specimens with different interface inclination angles were tested to failure under three-point bending configuration. Interface fracture parameters were obtained with finite element analyses. Based on the interfacial fracture mechanics, three fracture criteria for crack kinking were used to predict crack initiation and propagation. In addition, the effects of residual stresses due to coefficient of thermal expansion mismatch between zirconia and veneer on the crack behavior were evaluated. The crack initiation and propagation were well predicted by the three fracture criteria. For specimens at phase angle of 0, the cracks propagated in the interface; whereas for all the other specimens the cracks kinked into the veneer. Compressive residual stresses in the veneer can improve the toughness of the interface structure. The results suggest that, in zirconia/veneer bilayered structure the veneer is weaker than the interface, which can be used to explain the clinical phenomenon that veneer chipping rate is larger than interface delamination rate. Consequently, a veneer material with larger fracture toughness is needed to decrease the failure rate of all-ceramic restorations. And the coefficient of thermal expansion mismatch of the substrates can be larger to produce larger compressive stresses in the veneer.

Keywords: Bi-materials; Dental ceramics; Fracture criterion; Interface toughness; Mixed-mode.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Calibration
  • Ceramics
  • Compressive Strength
  • Dental Porcelain / chemistry*
  • Dental Restoration Failure
  • Dental Stress Analysis
  • Dental Veneers*
  • Equipment Design
  • Finite Element Analysis
  • Materials Testing
  • Stress, Mechanical
  • Surface Properties
  • Zirconium / chemistry*

Substances

  • Dental Porcelain
  • Zirconium
  • zirconium oxide